Recent Recovery News...
|
Sagitta Raid System., Sagitta raid systems were often found in printing, film, broadcast, video, oil and gas industries. These systems were based on the Fibre Channel Arbitrated Loop (FC-AL) interface. We have experience for recovering from many of their systems including SR 1201-FC, SR 1202-FC, RF 1200-FC, RS 1200-U160, RF 1200-FC, SS 1201-FC, SS 1202-FC (12 Bays) Fibre Channel Storage Cabinets. The units contain SCSI Seagate hard disks running Windows or Unix. We also recover Sagitta EziRaid and EziJBOD systems. Frequently the drives are ok but the RAID Controller card or Power Supply is blown. Simply call or email us for fast quote and turnaround (typically 2-3 days)..
|
Data Recovery, We recently recovered from an SCSI Intel GC80303 SL57T SRCZCR SRC series RAID Controller SCSI. There were 4 SCSI Hard Disk Drives 3 in Raid5 array and a Hot Spare. The raid went down leaving no access to the files and folders. We successfully recovered all the data enabling the School Pupils and Teachers to access their data. Call or email now for a quotation..
|
Data Recovery, A Dell Perc Raid array had failed with one disk down. Then Raid 5 was using Maxtor Atlas SCSI hard disks each 73gb. the Raid container status was critical and rebuild did not work It appeared to have incorrect parameters in it on our inspection - so possibly incorrect data recovery attempts had already been tried. We successfully recovered the data in 24 hours so Email or Call us now for a fixed price quotation..
|
RAID5 Rebuild and Recovery, A Netware server running on a Dell Poweredge (PERC) SCSI controller had 2 of the 3 hard drives fail (it had 3x73GB Fujitsu / Seagate disks). Obviously with 2 of the 3 drives down RAID 5 rebuild appears impossible but we successfully recovered all the data inside 3 days. So if you have a Netware Server and need to recover from the SCSI RAID5 then simply call or email us for a fixed price quote..
|
Data Recovery, Dell are famous for their PERC Raid controller in their Power Edge Servers. Theyused to be primarily SCSI although these days they are SATA or SAS based systems. A typical recovery we undertake involves 5x146GB SCSI Hard Drives from a PERC 4 raid. 3 of 5 disks had gone down and were reported as not recognised in the RAID-5. Email/call us now if you have similar problems..
|
Data Recovery Rebuild RAID., We can recover SCSI Raids running under Linux eg. SUSE Redhat Ubuntu server etc. Power supply failure can cause one drive not to be recognised with scsi controller reporting "ASYN start unit request failed". The raid will not mount. Call or email us for a quote. Remember that the less that the disks are messed around before they reach us the better the chances of recovery..
|
|
Recent Comments...
|
Didsbury
Manchester, 10/06/2011
Seagate 36gb SCSI hard disk drives were in a RAID5 array on a Windows NT machine controlled by Adaptec dpt i2o (dpti2o) raid controller. The system was showing - one and then two drives missing from raid 5 array and required data recovery. Many thanks for your help on this job..
|
Glasgow, 28/04/2011
There were 9x 300GB SAS disk drives from RAID 6 HP MSA2324fc G2. 3 disks in the RAID6 ADG Array failed and the MSA put the vdisk (virtual disk ) offline. Smart warnings were shown on the console and the disks brought back online using the Trust command. The RAID appeared online and rebuilt using a hot spare - one volme was available on VMWARE hosts but others were not. 3 drives marked as LEFTOVR (leftover). Needed to recover vmdk file representing a drive from a vmware virtual machine. All the vdisks were vmware vmfs format.Thank you very much (for the recovery work), that’s great news..
|
Manchester, 18/01/2011
There was a Dell Perc SCSI Raid Server containing 5xQuantum 18GB hard disk drives in a RAID5 configuration. One day the Raid failed and some hard drives were showing offline in the configuration screen so data recovery was required. Previous Raid rebuild atempts had failed. Thanks - this job was a huge relief for us..
|
2E2 UK Ltd, Newbury, Berkshire, 18/11/2010
The Sagitta raid system failed due to power supply / raid card failure. Thanks for the recovery. That’s good news - I’ thought it’d be wrapped in red tape for at least a month!! Would it be fine to come and collect the drive tomorrow morning (11’ish)? Thanks for the fantastic service!.
|
London. EC2Y, 23/09/2010
This job consisted of 8 x 320GB Sata RAID Hard Drives on 2 x 4 port SAS multi-lane ports. The controller was HighPoint Rocket-Raid 2322 (RAID 0, 1, 5, 10, 50 and JBOD) with Dual External Mini-SAS Connectors to Array enclosure. Highpoint advised the raid aray is corrupt and two sets raids are visible in the configuration screens whereas there should be one single 2TB raid. Log reports Disk Failed. Plugging Device detected. (’ST3320620AS’ at controller1-channel1) Status Disabled / Maintenance. The box has arrived intact, thank you for your work..
|
Congleton School, Cheshire, 11/08/2010
We had 4 SCSI Drives - 3 Raid5 + Hot Spare connected to an Intel GC80303 SL57T SRCZCR SRC series RAID Controller. We had previously approached another company which failed to recover the data. Thanks again for your support..
|
|
Apex Technology Ltd © 2003 - 2012. All Brand names, trademarks and codes are copyright and used for identification only and remain the property of there respective owners.
See Website Terms & Conditions here