Intel SS4000e SS42000e Data Recovery Raid Files

- 1-2 Days Turnaround
- No Recovery No Fee
- Fixed Price
Quote by Email : enquiry@apextechnology.co.uk
Quote by Phone: 01785 336300 / +44 1785 336300
raid data recovery

 EMAIL an expert NOW!

enquiry@apextechnology.co.uk

  CALL an expert NOW!
    tel. 01785 336300


ss4000e ss42000e data recovery

Intel SS4000e SS4200e Data Recovery


These raid units are also known as
Scaleo Home Server by Fujitsu Siemens
Altos Easystore by Acer
MiniVault NAS by Systemax
NS-520 Server by NORCO
INNS04-4200-LAC by Lacie


Lost Shares Folders recovery

The SS4000E and SS4200E can suffer failed raid array after sudden power cut or shut down. This can leave the Global Disk Status Light Blinking LED and System Status Light glowing Orange. In the user console a Disk Change Notification failed screen will probably be displayed when accessing the drives. User data will be inaccessible with failed RAID array. In the end it can leave you unable to access the device through the web interface or by using the storage system console.
SS4200 hard drive data recoverySS4000 hard drive data recoveryss4200e ss4000e recovery lost files and folders

Intel ss4000E Data Recovery Raid Rebuild Repair

Firmware upgrades can also upset the RAID array even though non of the SATA hard disk drives have failed.. We had reports from those whose Raid crashed. They could power cycle the boxand it starts to boot up and access all four drives. However it then stops booting leaving the system status yellow, and global disk led flashing yellow. All drive lamps are off.

The Intel SS4000 and SS4200 NAS devices have 4 SATA hard disk drives, RAID-1 RAID-5 or RAID-10 array for data protection, a web setup console interface, backup and recovery software for management of stored files and shared files and folders.

Systems utilising the proprietary Falconstor IPStorPartitions IPStor based units that we frequently recover data from include


Acer Altos Easystore
Systemax MiniVault NAS
NORCO NS-520 Server
Lacie No. INNS04-4200-LAC
Fujitsu Siemens Scaleo Home Server

The System Status LED Light is yellow


A critical error has occurred - call or email us for a quote and switch off the system. Probably one of the following problems
- Hard disk failure
- Operating system boot failure
- System board failure
- Hard disks are not configured
- Power supply failed


The Disk Activity LED Light is staying yellow


If the disk LED lamp is solid yellow, a serious problem with the disk might have occurred. Call or email us for a quote and switch off the system.

We can successfully recover the data from these devices so call or email us now for a quotation.


If you have a problem not described here then simply contact us by email enquiry@apextechnology.co.uk


Intel SS42000e 4000e Disk Data Recovery and Raid Repair Archive..




Recent Recovery News...


Scsi Raid File Recovery Intel Controller

Scsi Raid File Recovery Intel Controller

Data Recovery, We recently recovered from an SCSI Intel GC80303 SL57T SRCZCR SRC series RAID Controller SCSI. There were 4 SCSI Hard Disk Drives 3 in Raid5 array and a Hot Spare. The raid went down leaving no access to the files and folders. We successfully recovered all the data enabling the School Pupils and Teachers to access their data. Call or email now for a quotation..


Intel SS4000E INNS04-4200 not showing on network

Intel SS4000E INNS04-4200 not showing on network

Data Recovery, We recover data from the Intel SS4000E INNS04-4200. Other NAS with similar problems are the Lacie Ethernet disks, Acer Altos Easystore, Systemax MiniVault NAS NORCO NS-520 Server. Common problems are Flashing Light LED, Disk Change Notification failed screen and User data not accessible OR failed RAID particularly after unexpected or accidental power loss or shut-down. If you have these problems email or call us for a quotation - recovery timescale usually 2-3 days on these units..


Recent Comments...

SS4000-E NAS drive RAID-5 recovery - no data access

SS4000-E NAS drive RAID-5 recovery - no data access

Hypersys O.E., Attica, GREECE.
Intel NAS contained 500GB seagate SATA Hard Drives with RAID-5 configuration. The problem was caused by an unexpected power failure. On system boot, the web configuration console requested the disks to be initialized and their status is now New instead of RAID5 array. The initialization phase has not been kicked off, as this would probably have deleted all the data that is already there. Once again thank you for the recovery. Hopefully I will not need anymore..


Raid repair for Intel SS4000E Network drive

Raid repair for Intel SS4000E Network drive

Bologna, ITALY
SS4000E no longer recognize the disk raid after a power failure. It was impossible to access data in the disks. Very good news (on the recovery)! Drives arrived this morning, thank you..