RAID Data Recovery, Array Rebuild, NAS File Recovery

- 1-2 Days Turnaround
- No Recovery No Fee
- Fixed Price
Quote by Email : enquiry@apextechnology.co.uk
Quote by Phone: 01785 336300 / +44 1785 336300
raid data recovery

 EMAIL an expert NOW!

enquiry@apextechnology.co.uk

  CALL an expert NOW!
    tel. 01785 336300


We have a range of clients for our Data Recovery & Repair Service from UK and abroad from places such as Abu Dhabi, Australia, Belgium, Brazil, Canada, Dubai, France, Germany, Greece, Italy, Jamaica, Malta, New Zealand, Portugal, Russia, South Africa, Spain, Sweden, Switzerland and USA.


Data Recovery Recent Comments...

Iomega Ix2-200 drives drive data not seen

Creative Ltd, Richmond, London, 14/05/2013
2x1TB Seagate Barracuda LP HDD from Iomega Ix2-200 Mirrored Array. Possibly corrupt Superblock. A large pdf photoshop file was being saved just prior to the corruption / damage to the NAS. Since then the Iomega device has booted up but not been able to see the drive data. Iomega have exhausted all options and not been able to access the data. The array is visible but volumes will not mount due to no secondary superblock and needing a clean structure for the raid. I want to say thank you so much for helping us out, I can maybe get a good night’s sleep tonight knowing we can operate fully again. Many thanks from me and my team..



Iomega Ix2-200 drives drive data not seen

Easystore Shared Folder File Access

A INFORMÁTICOSG S.L. Madrid. SPAIN, 13/05/2013
4x 750GB Hard Disks from Easystore Altos. We had a RAID 5 with 4 hard drives. The RAID was working well, the discs are fine, can access the Home folder, but the rest only see the shared folders, but not their content. This happened after an unexpected power off. FalconStor filesystem. Thank you very much for your work, we are very happy..



Easystore Shared Folder File Access

Iomega 150d Storcenter data recovery after power outage

VEK IT Consultants, Utrecht, Netherlands, 10/05/2013
Iomega STORECENTRE 150d 2TB NAS with 4x 750GB Seagate SATA Hard disks. Disk volume unreadable - the system NAS crashed after power outage. The unit did not start anymore but the disk status led blinks red/green. Main board defect, possibly header corrupt for the raid 5 configuration. The disk arrived this week, was busy so I´m a bit late in the feedback. Have loaded the data on the new NAS. It looks fine. Thanks for your support..



Iomega 150d Storcenter data recovery after power outage

Fujitsu SX80i Fibrecat Virtual machine recovery

DSI SCRL, Bruxelles, Belgium, 05/02/2013
FibreCat SX80-i iSCSI Raid 5 ESX VM-ware Virtual Machines - data recovery. 12x 750Gb Seagate Hard Drives ok - Raid Controller failed. System NAS crashed after unexpected power outage. 11 drives were in the raid array and disk 12 was Hot Spare. After the crash disks 2 6 and 10 were in Left Over state. Fujitsu engineer applied the Trust Command but the raid would not start. There were 4x 2TB LUN's each formatted with VMFS. The VMDK files were a mixture of Linux EXT and Windows NTFS virtual disks. Thank you also for recovering our data, we have a lot of users who were without services, including Belgian administrations. I will recommend your services....It was a pleasure to work with such an expert like you..



Fujitsu SX80i Fibrecat Virtual machine recovery

Recover Thecus from failed drive iSCSI Raid 5

Shwlan Comms Ltd Cambridge, Cambridgeshire, 30/01/2013
Thecus i5500 iSCSI NAS 5x 1TB drives in Raid5 array, Disk 4 failed and was replaced 10 days ago, now disk 1 failed and says that d1 and d4 no longer part of raid. No data access as 2 disk are missing from the RAID 5. Thecus service engineers could not gain access to the unit remotely as the unit would not allow them to repair it. The unit provided iSCSI partitions formatted in Windows NTFS file system. Thank you - it is reassuring to see some familiar images again..



Recover Thecus from failed drive iSCSI Raid 5

Easystore disappeared from network

Technical Services, Oxford, Oxon, 25/01/2013
Acer Altos Easystore - stopped talking on network - drive lights appear ok. Data Recovery required from the 4x Seagate Barracuda 7200.11 500GB drives. System was setup as raid 5 and failed over the holiday. Could not find Public Directory. You have done a marvellous job. Well done..



Easystore disappeared from network

Iomega Store Center Ix2 Flashing red LED raid data recovery

Bracknell, Berkshire, 21/01/2013
Iomega Store Center Ix2 failed and I needed to recover the data stored on the device. The issue was that the device would not power on and a red light is flashing on the front. A friend has taken a look, possibly a mistake having read your site. I insisted no further action was taken as I believe the drives are configured in the RAID mode, and therefore I hope to get my data back! The device had 2x Seagate 500GB HDD in raid..... I've hooked the drive up to a USB caddy and I can see all data. Thank you for the service, it's good to have our data back..



Iomega Store Center Ix2 Flashing red LED raid data recovery

Buffalo Linkstation Duo failed to boot up

Banbury, Oxfordshire, 09/01/2013
Buffalo Linkstation Duo 1TB NAS drive failed to boot up when powered. It contained 2 off 500GB 3.5 inch Samsung SATA hard drives. The Linkstation was incorrectly switched off and now only enters Emergency Mode when switched on. Both hard drives inside it remained silent and would not spin up. Thanks for rescuing our files so quickly..



Buffalo Linkstation Duo failed to boot up

E04 kernel load error on Terastation data recovery

Wandsworth, London., 01/12/2012
Buffalo Terastation HS-DHTGL/R5 with 4x Seagate 7200 250gb hard drives. The terastation would start to boot up then fail with System Error E04 - can't load kernel fault message. Obviously we could not access it via the network. The recovery was excellent news. Thank you very much..



E04 kernel load error on Terastation data recovery

Terastation HD-H1.0TGL/R5 no LAN link activity

Blackpool, Lancashire, 22/11/2012
Buffalo Terastation HD-H1.0TGL/R5 4x250gb WD2500 Western Digital Hard Drives. The Network connection appears to be broken - no activity from the Link/Act LED flashing. 1 disk had red status light and stopped syncing. Thanks for the speedy turn-around..



Terastation HD-H1.0TGL/R5 no LAN link activity

SC101 data recovery dfrom lost partition due to firmware

Stuttgart, Germany, 16/11/2012
We had installed a netgear nas SC101 but had problems with one 200 MB hard drive. The Netgear SC101 has 2 Maxtor DiamondMax hdd in separate use with separate drives (not use as a mirror to system). The Disk spins and is recognised by the Netgear software. The Netgear Smart Wizard shows the drive as available, but there is no way to attach the drives of one of the hard disks, so there must be something broken. The other Hard Disk is still available and all partitions / drives are attachable and reachable. The failure happened after firmware update, after this step, we could only reach the one of both hard drives. Thank you for your help, have a wonderful weekend..



SC101 data recovery dfrom lost partition due to firmware

WD MyBook raid array data recovery

IDPartnership, Glasgow, Scotland, 12/11/2012
WD MyBook World Edition (blue ring leds) NAS - broken mirror raid 1 array.- WD7500AAKS 750gb drives x2. Possible attempt by raid controller to rebuild the array. One drive failed. The other does not show any files or folders when connected to the computer. we can confirm that we are in safe receipt of the drive. Not only that but we have now added it to a workstation (our server is SCSI, no SATA), with drives mapped to it, so we're back online. I see the folder structure appears to have been retained, which is a bonus. Your assistance is appreciated..



WD MyBook raid array data recovery

Terastation data recovery raid E14 error

Sanderson Ltd, Sheffield, 07/11/2012
Buffalo Terastation Data Recovery 2TB (4x500GB Hard drives) Initial Error displayed was System Stopped. After a re-boot it displayed Can't Mount Raid Array E14 error message. Finally it reported I12 degraded mode. I have received the data disk an am already transferring the data. Thank you very much for all your help..



Terastation data recovery raid E14 error

DriveStation Quattro Data Recovery

iRespons Ltd, Glasgow, 06/11/2012
Buffalo DriveStation Quattro with Drive 3 failed and Raid card faulty. The array appeared to be turned off, no fan, no LEDs, unit dead. The recovery is really good news. Thanks for all your help with this...



DriveStation Quattro Data Recovery

Altos Easystore file recovery

Sogipers srl, San Benedetto Del Tronto, ITALY, 11/09/2012
Acer Altos Easystore NAS drives. There were 2 Easystore raids each with 4 Seagate 500GB Hard Drives. No longer gave access to disks. Without disks inserted, the unit restarts and can access on the web interface. Inserting disks into it gave no access. Powered off by front button, after reboot both NAS are unreachable over the LAN network, i LED blinks and all disk lights are green. Without disks the NAS gets default parameters and works fine. We have reset it by pressing the button but no effect. I've just checked the files in the external drive and i confirm that your work has been perfect. Thanks..



Altos Easystore file recovery

PowerEdge SCSI raid array data recovery

Manchester, 06/09/2012
Dell PowerEdge 2850 PERC 4DI Raid5 SCSI Data Recovery. The Raid array consisted of 4 146GB SCSI SCA-80 U320 connected drives. The disks were fine but they have corrupted RAID database information from a faulty RAID controller, which has run in degraded mode. The drives were Maxtor Atlas 10k Ultra320, Seagate Cheetah 10k.7 ST3146707LC, and Cheetah 15K.5 ST3146855LC. That's a huge relief for us as it will save us a couple of months redeveloping a lot of web forms. Thanks for looking at this so quickly..



PowerEdge SCSI raid array data recovery

Terastation kernel falure shares not shown

Newbury, Berkshire, 02/09/2012
Terastation failed to start from power failure just booting into "Loading Kernel". After several attempts to restart it went to EM mode and could not be recovered. Buffalo suggested firmware update, it did re-boot it then power-cycled again but would not re-start. Terastation could be seen by NAS Navigator, on PC but not in File Browser or firmware update utility. Now displays RAID failure, HD1 faulty. No file/folder Shares are visible. Buffalo Teratstation Raid E13 error in array D12 running degrade mode drive 1 fail - not visible on network - data recovery. 4x500GB Samsung HD501LJ hard drives. Thank you very much - got all the disks and data back now - we shall pass on your details to others who may be in need..



Terastation kernel falure shares not shown

Linkstation Quad Data Recovery

Bromley, Kent, 03/08/2012
Buffalo NAS - Linkstation Quad LS Q4 0TL/R5 4x 1TB Samsung hard disk drives. Correspondence with Buffalo Tech suggests that the motherboard has failed. Needed to recover the photographs and video from the unit. Just to confirm safe receipt of your package and that I can view the files on the new hard drive. Thanks for your help..



Linkstation Quad Data Recovery

Freecom Data Tank Data Recovery

London, 02/08/2012
Freecom 1TB Data Tank started making a hissing noise and required data recovery. The tank consisted of 2x Samsung hard disk drives in mirrored Raid1 configuration giving 500GB of disk space. Data transferred to 2TB Verbatim esata / firewire hdd. Many thanks and excellent news on the recovery!.



Freecom Data Tank Data Recovery

Terastation lost Raid after Power Cut

Worthing, West Sussex, 27/07/2012
Buffalo Terastation lost RAID 5 (4 x 500GB Hard Disk Drives) after a Power cut while the NAS box was online. 2 disks were showing as faulty so Data Recovery from the share folders was required. Thanks again for all your help..



Terastation lost Raid after Power Cut